So I got this setup and added some CNAME dns entries pointing to my dnsexit supplied domain name. But I’m having issues setting up some code to update the DDNS entry. ez-ipupdate is a seemingly ancient piece of software that still compiles well but it only wants to use the IP found in ifconfig, and… Continue reading Dynamic DNS with dnsexit.com
Author: Sam
Drupal developer from Perth, Western Australia. I love programming, gaming, the Internet, growing vegetables and hiking.
XBox wireless receiver in windows 7
This is a pain to get going. For future reference: Got to Device Manager Right click on the Unidentified Device Go to Properties Go to the Drive tab Click on Update Driver… Browse my computer for driver software Let me pick from a list of device drivers on my computer Windows Common Controller for Window Class… Continue reading XBox wireless receiver in windows 7
Permanently mounting an external USB hard drive on a Raspberry Pi
Find the external drive using fstab pi@raspberrypi:/mnt$ sudo fdisk -l Disk /dev/mmcblk0: 7964 MB, 7964983296 bytes 4 heads, 16 sectors/track, 243072 cylinders, total 15556608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000827fa Device… Continue reading Permanently mounting an external USB hard drive on a Raspberry Pi
Adding a new image style to Media WYSIWYG while using Display Suite
This is getting a bit convoluted, but I guess thats the price of power. Create the image style. Create a corresponding view mode and allow it to be used with files Enable the view mode for the image field type. Go to the image file display and select the view mode from the tabs Check colorbox… Continue reading Adding a new image style to Media WYSIWYG while using Display Suite
PrintrBot Simple 2013 Troubleshooting
Getting one of these great little 3D printers working correctly can be quite a mission. I think I’ve worked out most of the kinks though, so here are my quick fixes. Extruder Clogged The extruder motor is turning the gear correctly and the motor isn’t skipping.. what next? Most likely you have a clog, which… Continue reading PrintrBot Simple 2013 Troubleshooting